CVE Vulnerability Database
Search and browse 394,639 CVE records with CVSS scores, EPSS exploit predictions, CISA KEV status and whether the Vulnix engine has a detection for them.
394,639 records
- CVE-2026-115754Medium 4.7Oct 23, 2026serialize-javascript from 7.0.1 before 7.1.3 contains a cross-site scripting vulnerability that allows attackers to break out of HTML script elements by ending serialized function source text with an unescaped </script. Attackers controlling a function's source via a spoofed toString() can combine surrounding output delimiters and later values to inject live markup such as img onerror handlers.
- CVE-2026-115481High 8.5Oct 23, 2026baserCMS is a website development framework. Starting in version 5.0.0-beta1 and prior to versions 5.3.2 and 5.4.2, `PermissionGroupsService::build()` reads a plugin's `config/permission.php` to decide what each user group may reach. When that file is absent it writes a wildcard allow rule instead: `url` `/baser/<prefix>/<plugin>/*`, `method` `*`, `auth` true, for every non-admin group. BcCustomContent has no such file in any release. After an administrator installs it, the default `operators` group can store and execute arbitrary PHP under the document root. Versions 5.3.2 and 5.4.2 patch the issue.
- CVE-2026-115480Medium 5.3Oct 23, 2026baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-115479Medium 5.3Oct 23, 2026baserCMS is a website development framework. In versions 5.2.5 before 5.3.2 and 5.4.0 before 5.4.2, an unauthenticated visitor can supply a comma-separated address list in a public mail form's email field and cause a single auto-reply to be addressed to multiple third parties. MailMessageMailer::sendFormToUser() passes the visitor-controlled userMail value to parseAndNormalizeMailAddresses(), which splits it with explode(',') and supplies every resulting address to setTo(). Newly created forms with an email-type field are affected when the separate, optional VALID_EMAIL server-side validation is not enabled; browser type=email validation does not prevent crafted requests. The bundled contact form enables VALID_EMAIL and is not affected. The auto-reply uses the site's sender identity and includes partially attacker-controlled content, allowing abuse of the site to deliver unsolicited mail. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-115457High 7.1Oct 23, 2026baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, global shortcode expansion runs over the complete rendered page, including HTML-escaped blog comments supplied by unauthenticated visitors. A comment containing the BcBaser.getGoogleMaps shortcode can set apiBaseUrl to an attacker-controlled script URL, which is emitted as a script src and executes JavaScript on the site's origin when another visitor or administrator opens the article displaying that comment. Escaping raw HTML in comments does not prevent this stored cross-site scripting because shortcode processing happens after HTML rendering. Other registered shortcodes also expand in comments; Mail.getForm can embed a working contact form with a valid CSRF token. The flaw can compromise the authenticated browser context of an administrator who views the affected article. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-114624High 7.2Oct 23, 2026baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the widget-area entity serializes widgets only when the submitted value is an array, allowing a string submitted through the admin JSON API to be stored unchanged. Entity reads, including front-end rendering and API responses, deserialize the stored value with unserialize() without an allowed_classes restriction, accepting both raw and base64-encoded serialized data. An administrator, or an attacker who obtains widget-write capability through a separate vulnerability such as chained XSS, can plant an object graph that subsequently triggers on unauthenticated page requests. Two demonstrated gadget chains in the default dependency set use composer/composer ProcessExecutor::startJob() with Process::fromShellCommandline(), or logiscape/mcp-sdk-php StdioTransport::connect() with StdioServerParameters, to reach proc_open() and execute commands as the web-server user. Deserialization bypasses constructor-based readonly safeguards, and the stored payload can execute repeatedly until the database row is repaired. Unauthenticated page access is a trigger after privileged payload storage, not an unauthenticated means of initially planting the payload. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-114623Medium 6.5Oct 23, 2026baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, an authenticated user with only theme-file view permission can traverse outside the theme directory through the optional BcThemeFile plugin's Admin web screen. ThemeFilesController::parseArgs() constructs a path containing literal ../ segments, and the view and edit actions pass it to ThemeFilesService::get() without containment validation. Authorization checks the unresolved request path, after which ThemeFile::_getContents() reads the resolved file and exposes its contents in the form textarea. A client must preserve the dot segments rather than normalize them away. Readable files are limited to .php, .css, .js, and .ctp; this can disclose application source and config/install.php database credentials in MySQL or PostgreSQL deployments, while SQLite configurations have an empty database password. Reading config/app_local.php may expose the Security.salt fallback, which is effective only when not overridden by environment configuration. The flaw does not disclose .env, .pem, or SQLite .db files, does not itself permit file writes or code execution, and does not affect the separate API getFullpath() route. The plugin is disabled by default and unauthenticated requests are not sufficient. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-114622High 7.2Oct 23, 2026baserCMS is a website development framework. In versions 5.2.3 before 5.3.2 and 5.4.0 before 5.4.2, the optional BcThemeFile plugin's Admin API validates a raw path in ThemeFilesService::update() and getFullpath(), but ThemeFileForm::_execute() subsequently applies rawurldecode() to fullpath before writing. Because normalizePath() resolves only literal dot segments, percent-encoded traversal can pass the containment checks and become a path outside the theme directory at the write sink. An authenticated administrator can write PHP files into writable locations such as webroot and execute them, exceeding the intended theme-template editing boundary. The source also identifies the same check-before-decode ordering in ThemeFilesService::copy(), although that path was not dynamically verified. Exploitation requires the non-default plugin, an administrator session, and a same-origin Origin header; USE_CORE_ADMIN_API=false does not block session-authenticated requests. The Admin web form is not affected by this encoded-path tampering because FormProtection protects fullpath. This is a third bypass of the protections associated with CVE-2026-30940, using encoded traversal decoded after validation. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-114621High 8.8Oct 23, 2026baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, list and detail actions in the Admin and Api/Admin prefixes pass request query parameters, including contain, conditions, fields, finder, and order, directly to the ORM as options. A user able to log into the admin panel can embed SQL fragments in those options to execute arbitrary SQL against the application's database, including reading password hashes from the users table. Public-page and public-API fixes released in 5.3.1 and 5.4.1 did not protect these administrative paths. Setting USE_CORE_ADMIN_API to false does not prevent access through an authenticated browser session. This issue has been patched in versions 5.3.2 and 5.4.2.
- CVE-2026-114357Critical 9.3Oct 23, 2026Missing authentication for a critical function in the Android Debug Bridge daemon (adbd) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 allows an attacker to obtain an unauthenticated shell (uid 2000), a foothold for privilege escalation to root. The device ships with ro.adb.secure=0 (no host key authorization) and USB ADB enabled by default; ADB over TCP is not enabled by default but, once enabled (e.g. via the shipped /system/bin/adbd_tcp.sh or 'setprop persist.adb.tcp.port 5555'), the same unauthenticated shell is reachable over the network (CVSS 4.0 base 9.3).
- CVE-2026-114356High 7.0Oct 23, 2026Missing authorization in the system-privileged 'DJIUpdateService' binder in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local application with no permissions to invoke privileged operations, including factory reset with user-data wipe (transaction 153), shutdown (105), clock/timezone change (101/123), and the firmware-apply hand-off (151), because onTransact() performs no caller-identity or permission check.
- CVE-2026-114355High 8.6Oct 23, 2026OS command injection in the root-privileged 'hardware_monitor' helper in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local unprivileged process to execute arbitrary commands as root by writing a crafted line to the Android log (logcat), which the helper reads and passes to a shell eval.
- CVE-2026-114354High 8.6Oct 23, 2026Missing authorization in the native binder service 'android.dji.server' (transaction code 1018) in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a local application with no permissions to execute arbitrary OS commands as root, because the handler passes a caller-supplied string to system() in the root-privileged 'assistant' daemon without any caller-identity or permission check.
- CVE-2026-114353High 7.0Oct 23, 2026Hidden functionality (undocumented backdoor) in the root-privileged 'assistant' daemon in DJI CrystalSky ZS600C firmware v0.3.9.7 through v0.6.6.9 on Android allows a physically-present attacker with USB access to execute arbitrary OS commands as root by sending the hard-coded magic string 'dji26656677' to the USB-gadget serial interface (/dev/ttyGS0), after which each subsequent line is passed to system().
- CVE-2026-10632High 8.7Oct 23, 2026A reflected cross-site scripting vulnerability in the Classic Web Client of Zimbra Collaboration Suite (ZCS) allows an attacker to inject JavaScript through the packages parameter of the /h/rest document editor. The editor inserts package names into script attributes without HTML encoding. When combined with CVE-2026-50053, an attacker with an ordinary Zimbra account can supply their own authentication token and document identifiers in a URL and execute JavaScript in another signed-in user's Zimbra browser session when that user opens the URL. This permits reading mailbox data and performing authenticated actions as the victim. The issue affects ZCS 10.1.16 and was remediated in 10.1.17.
- CVE-2026-99087Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix NULL pointer dereference when the 'R' flag is used If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the user activates the device in the 'R' mode, a crash in dm_integrity_resume happens because the function attempts to read the journal containing the bitmap. This patch makes dm-integrity skip any writes to the device in dm_integrity_resume if the device is activated in the 'R' mode.
- CVE-2026-99086Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed.
- CVE-2026-99085Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU.
- CVE-2026-99084Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock.
- CVE-2026-99083High 8.8Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space.
- CVE-2026-99082High 8.8Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass.
- CVE-2026-99081High 7.5Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch.
- CVE-2026-99080Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: fs: Free any excess xarray nodes in clear_inode() For many years we've had a hard to hit leak of xarray nodes. Hugh documented it well in commit 786b31121a2c. Recently people and syzbot have found ways to force it to happen with madvise. Rather than fix the leaks where they happen, just call xa_destroy() which has the side-effect of cycling the i_pages lock.
- CVE-2026-99079Critical 9.8Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on refill retry When an XDP redirect to an AF_XDP socket fails because its RX ring is full, the XSK core frees the buffer. During the subsequent batched refill of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before allocating a replacement. If that refill succeeds only partially, a WQE left without a replacement retains its old buffer pointer. The buffer can meanwhile be allocated to another WQE. A later refill retry can then free the live buffer through the stale pointer and publish the same UMEM frame twice. Mark the WQE as released immediately after the driver-side free. The flag is already cleared when a replacement buffer is assigned, so refill retries no longer release stale pointers. The failure is silent and produces no kernel warning or splat. A standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914 packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64 ownership/double-publication errors. With this change it processed 356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events, with no ownership or data errors.
- CVE-2026-99078Critical 9.8Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until an MPWQE is refilled. If XSK allocation then returns -ENOMEM, actual_wq_head is not advanced and a later NAPI poll retries the same WQE. mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On retry it can therefore call xsk_buff_free() again through stale pointers after the frames have returned to the XSK pool and been reallocated. Set all skip_release_bitmap bits in the common error path of mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A successful allocation already clears the bitmap after replacing every buffer, so retries become idempotent without changing the success path. Fault injection forced three consecutive failures for one selected MPWQE. Both an early allocation failure and a partial 8-of-16-buffer unwind released the original 16 XSK buffers only once. Each error left a full bitmap, the following NAPI retry skipped the release, and a later successful allocation cleared it. A 20-second AF_XDP zero-copy pressure run exercised 1,575,262 buffer allocation failures without invalid descriptors, WQE errors, or kernel warnings.